Index » Tienda » ACCESORIES » EXPANSION JOINTS » FLANGES »
EPDM FLANGED EXPANSION JOINT
KTN 823E
- GALVANIZED CARBON STEEL FLANGES
- HIGH STRENGTH REINFORCEMENT RING
- FUEL IN EDPM WRAS FOR DRINKING WATER
- ABSORPTION OF MECHANICAL STRESSES
Range: DN32/600
Pressure: PN10/16/25
Std temperature: -10ºC ~ 120ºC
EPDM FLANGED EXPANSION JOINT
GALVANIZED CARBON STEEL FLANGES
HIGH STRENGTH REINFORCEMENT RING
FUEL IN EDPM WRAS FOR DRINKING WATER
ABSORPTION OF MECHANICAL STRESSES
KTN 823E
Range: DN32/600
Pressure: PN10/16/25
Std temperature: -10ºC ~ 120ºC
Description
EPDM COMPENSATOR WITH DIN / ANSI FLANGES – KTN 823E
Our compensator KTN 823 consists of an EPDM Wras rubber body (for drinking water) joined to two flanges according to DIN standard made of galvanized carbon steel. Our compensator is designed to reduce noise, absorb vibrations and compensate for expansion in the installation. The range includes from DN32 to DN600. Its pressure range is PN10/PN16/PN25 while its rupture range is PN30. It tolerates temperatures from -10ºC to +120ºC.
Features
EPDM COMPENSATOR WITH DIN / ANSI FLANGES – KTN 823E
Flanged ends
Galvanized Carbon Steel Flange Made of Stainless Steel, BS EN1092-1 DIN Standard, PN10/16/25
Bellow
The inside of the bellows is made of braided nylon fibers while the surface and the inside face are made of WRAS EPDM. This combination gives it great robustness to fulfill its mechanical absorption functions.
Reinforcing ring
Reinforcement ring made of #55 steel attached to the tangent end for additional reinforcement.